How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of steps that are unique to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. Then a new key and transponder have to be purchased and programmed to the car.
Rotate your keys to prevent one from deteriorating faster than another. This will keep your keys in good condition.
Replacement Case
As opposed to the traditional saab milton keynes keys of old keys, the latest key fobs have electronics inside which makes it more difficult to make a copy. This has made stealing car keys much more difficult than twenty years ago. However, it also has made the replacement of lost keys a much more expensive endeavor.
Every owner of a Saab 9-3 must have at least two functioning keys. It’s expensive to replace a lost key as it requires replacing the CIM module, and reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.
There are several ways to get around the high price. Some parts providers will use the code of an extra key to cut a brand Saab key new metal blade for a fraction of that of a dealer. The key must be the exact same as the original to allow it to function in your vehicle.
Follow these steps to replace the case. You will need to have an open-faced screwdriver and patience. Using the screwdriver, slowly tear the plastic away and separate the emergency key from the case. Once the case is open, take the electronics out and place them inside your new case. Insert the correct key and badge into the case.
Replacement Battery
The saab key programming near me 9-3 replacement battery is a budget part that can be quickly and easily replaced. Cyclone’s YouTube video Cyd shows how to replace the battery for the remote fob in just four steps. This tutorial should work for any modern saab key fob, however, the procedure may differ slightly.
The first step is to find the button that opens the backup key in the fob. This button is usually located on the back of the fob close to the Saab Logo. Use a flathead to insert the screwdriver into the small hole in this button. This will allow you to open the fob’s case so that you can replace the battery.
Once the new CR1632 battery is in place it is possible to reassemble the remote key fob and then program it to your car. The whole process should take more than a half hour at the most. This is a simple process that doesn’t require any special tools.
The procedure is a little more complicated in the event that you lose your key, but it is possible. The dealer will have to verify the VIN of the car, and then order a new key blade and TWICE module, both with the exact unique code. The dealer will then need to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob comes with batteries that are used to lock and unlock your car. The batteries last for a certain time, and they will eventually fail. This is a frequent issue for all vehicles. The good news is that you can replace the battery in all key fobs, without having to replace the entire case. You can purchase replacement fobs from Amazon that include all the electronics already installed, so you can simply open the case and replace the batteries in the original case. You will need to remove the emergency key before you replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot in the middle of the. Use the screwdriver to move around the case until it is split open, making it easy to take it out.
When you’re ready to replace your keys, ensure you have a spare, as this can reduce your total cost by a significant amount. If you have spare keys, you can request that the dealer cut an additional key and program it to the car, which is cheaper than replacing the whole key fob.
It is possible to add another key to your car if you don’t already have one, but it requires some research and work. Adding a second key costs several hundred dollars and it requires programming of the car’s computer. Professionals can do this, but it’s an expensive option.
Replacement Ignition
The latest SAAB 9-3 has an alarm system that is more sophisticated based on a key code. This means that in the event that you lose your only working key, replacing it with another key can be extremely expensive because the car needs to have a unique computer module installed, and it must also be specifically programmed to accept a new key. Most locksmiths cannot do this or even a dealer will charge several hundred dollars just to program the new key!
Dealers will charge you a high price to replace your car’s computer (also known as the CIM or SAAB twice) in the event that you lose your only working key. Instead, we can reprogram the EEPROM in your current car computer to make it ready for an additional key, and save you over 50% of the price you spend at a dealer.
If you’ve been a long time owner of an 03-11 SAAB 9-3, you probably realize that the ignition key isn’t very robust. If your ignition key is not working correctly, you should consider replacing it. They can become very sticky and the buttons are known to fall off. It’s good to know that replacing the ignition key isn’t as difficult as it sounds and can be done in a short time using the proper tools.