Replacement Upvc Window Handles
The majority of replacement upvc window handles include everything you require to complete the task. However, if the old handle had screws or pins that held it in place, they are required to be removed. Remove the’snap-in’ covers at the base of your handle.
You’ll need to determine the type of window lock and handle you are replacing. This is crucial!
Espag
Espag handles are a system of multipoint locks that are suitable for casement windows such as uPVC or wooden double glazing. They feature seven millimetre square spindles that can be fitted into the gearbox on the uPVC window. When the handle is turned, it opens a series of locks around the perimeter of the window. Espag handles are also known as shootbolt handles and offer more security than the conventional single point lock that is found on older frames.
They are available in a range of different styles, such as inline and cranked designs that can be used for either left or right-hand operation. There are also ergonomic handles that improve the look and feel of your window as well as the handle.
You’ll need to determine the spindle size from the base of your uPVC handle if you want to order the correct replacement. This measurement is known as step height and can assist you in finding the ideal uPVC handle for your home.
You may need to remove any screw covers which protect the screws that hold the handle in place, and if that’s the case, you can use a screwdriver or pliers to take out the pins that hold the handle. After this is done then you must disassemble the handle by taking out the screws or pins that hold the spindle before pulling away from the window.
When you have the handle removed, you’ll be able to access the locking mechanism within the frame of the window. You can then remove the cockspur wedge block that is fitted adjacent to the handle, allowing the window to open. The new uPVC handles you have ordered will be able to slide over the cockspur block, and then into the handle spindle to allow the window to be opened again. If you want to be sure that your uPVC handles are properly secured and secure, you should replace the cockspur block the brand new block.
Cockspur
Cockspur handles can be found on older uPVC or aluminum windows. The handle turns and closes over an aluminum wedge-shaped receiver catch (not to be confused with timber window latches which are also handled in this section). These handles can be lockable or replacement upvc window handles nonlockable. They come in a range of different nose sizes to match the frame.
The handle is locked by a small triangle-shaped spur (spur) which is fixed to the frame. They are typically one-way handles however a deadlock lock cylinder that locks can be fitted for additional security.
Like the Espag handles cockspur handle replacements are easy to install, all you need is a new set of screws (supplied) and the correct backset. The backset is the distance from the baseplate of the window to the underside of the nose of the handle. As a general rule Aluminium window frames tend to have a backset of 9mm, whereas UPVC employs 21mm. There are a variety of variations, so it’s important to measure before buying the handle.
This kind of window handle can be changed by simply unscrewing the existing handle and removing the spindle, or in certain instances, the entire handle assembly. The new handle will then be secured with two pozidriv screws. The pozidriv screw can be purchased in a brass or a zinc finish, to match the existing hardware. There is also an option of a self-locking pozidriv screw.
This cockspur handle can be simple to install and is ideal for replacing or repairing old uPVC Windows. They are an unidirectional design that makes them suitable for all backsets and profiles. Each handle is supplied with 3 packers that vary in thickness, these are neatly placed on the side of the handle’s nose and can be used in different ways to get backsets of 9-13mm, 17mm and 21mm. They are available in left and right handed versions, and are available with lockable or nonlockable models with a choice of nose heights.
Tilt and turn
Tilt and turn windows are a popular European window style that has been around for decades in Europe but is just starting to catch on in the United States. The windows are a combination of three different window styles: tilt, in-swing, and pivot. They are great for older homes since they are more breathable than standard windows.
When in the closed position tilt and turn windows lock as a normal fixed window. By turning the handle 90or 180 degrees, depending on the tilt-and-turn type of window the sash opens to the outside and the window will tilt inwards to allow air circulation. This is a great method to allow ventilation without having to open a large windows, which could pose a security risk if not properly secured when opening.
The sash is also able to be opened fully by turning the handle 90° or 180°@. This allows full air exchange which is especially useful in rooms that are chilly or houses where smoke and other odors can accumulate. This allows you to easily clean the glass’s outside since you can do it from inside your home. This is a task that can be a risky task.
Tilt and turn windows are very secure. They are very difficult to open when they are locked in the closed position. They also have double seals that prevent rainwater from entering your home while in the tilted position, or in swing. This feature is especially useful for older homes where burglars tend to target windows that can be opened using side hinges.
Spade
There are several different types of handles that can be installed on double-glazed windows made of upvc. The two most popular kinds are Espag handles and Cockspur handles, then there’s also tilt and replacement upvc window handles turn handles, spade or blade handles and monkey tail handles. The type of handle that you pick will be based on your preferences as well as the type of windows you have.
To choose the right replacement upvc window replacement cost handle, you have to know how your current handle is attached to the frame. This is called handing and is an essential aspect to know, particularly when buying online as some handle variations don’t fit all windows. For instance, some cockspur handles are angled, whilst others are straight and turn either left or right. It is also important to know what the spindle’s length is, which is the distance from the base of the handle to the tip of the handle.
Another important part of choosing the correct handle is knowing whether your windows require a restrictor or not. They are typically used in high rise flats or commercial properties, but they aren’t a requirement for most domestic homes. Also, you should be aware of the step height which is the distance between the screw plate and the nose of the handle.
Spade comes from Old English spadu, spaedu or spada. It has been translated into numerous languages including German spaten and Low German spathen. In the Harlem Renaissance of the 1920s in New York City the word spade was used to denigrate black people. Since the time, the word has become a symbol of African American pride and heritage.
When replacing a Cadenza style handle, it’s crucial that you get the right size. The handles are available in straight and angled versions that differ by a few millimetres. The handle head is available in a variety of designs such as a D or T shape. It can also be left without handles.