replacement windows prices Handles For UPVC Windows
UPVC window handles are available in different styles, but they all share the same locking mechanism. To replace a uPVC handle, first remove the top screw from the base of the window handle. This will reveal two more screws.
Then, take a measurement of the length of the spindle to ensure your new handle is a good replacement. It is essential to determine the type of handle you have, as there are several sizes.
Inline Espagnolette Handles
Espagnolette handles are present on most modern double glazed windows and operate multi-point locks which provide greater security. They work by using the 7mm square spindle on the back of the handle that connects to a gearbox on the inside of the window frame, which turns multi-lock mushrooms when turned. They are available in a range of designs, including cockspur keys, inline and locking handles.
Our uPVC replacement handle kits are designed to make it simple to replace a damaged or defective window handle with a espagnolette. These uPVC handles include all the fixing screws as well as a range of spindle sizes suitable for all applications. They also come with key plugs to enable them to be changed from the standard open/close handle to the egress and fire escape locking handles (if used in conjunction with the proper key plug).
If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don’t need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.
Yale Sparta Inline Espag Handle is a different option. It was created to reduce aesthetic interference and has a shorter height at the base. It is part the suited hardware range and comes in a range of finishes that all comply with the requirements of BS EN1670 : 2007 Grade 5. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They also work with cylinder immobiliser inserts to achieve key-locking status where this is required.
Cockspur Handles
Cockspur handles, typically found on older uPVC or aluminum doors and windows, are a simple latch-and-catch arrangement. The handle’s nose is connected to or placed into the catch, which is a wedge block of plastic mounted on the frame of the window. The wedges are available in different sizes, and it is important to know what step height you need before buying a replacement handle. Typically, uPVC frames come with a handle step of 9mm. aluminium frames tend to use a step size of 21mm.
The cockspur handle is lockable with a key, adding security to your home. The lock is installed inside the handle using the spindle which fits into the hole of the handle (also called a backset). The spindle has a 7mm square cross section and can be used to either open or close the window.
It is crucial to make sure that the new cockspur handle is the same height of the original. This is usually measured from the base spur of the handle to underside of handle nose. This measurement is often referred to as the stack height or the backset. It is essential to know this information before placing an order for any handle.
Cockspur handles can be straight or universal or cranked and are available in left hand or right handed versions. This permits the handles to be installed on right or left opening windows and gives the operator more ease of use.
It is important to check whether or handles not your window requires a restrictor that is designed to stop the handle being extended beyond a certain amount. Generally, these are required for high-rise commercial buildings or flats due to security reasons. However, most domestic homes do not require these.
There are many different styles and colors of cockspur handles including white uPVC and brushed steel. The best cockspur handle for your windows will depend on your personal style and taste as well as how you want the window to work.
Handles that can tilt and turn
Tilt and turn handles are a very popular type of handle, which are commonly seen on double-glazed windows in the UK. They can be found on both upvc and timber windows. The handle is usually set at 90 degrees, but it can also be rotated in 180 degrees. This allows the window to be fully opened into the room and can also drop down for ventilation. The handle is locked in this position and requires a key to unlock it when needed.
This kind of handle is able to be replaced since it only has one big handle and not multiple smaller ones. This reduces the appearance of the handle and is more in line with modern minimalist design trends. In addition they are much simpler to clean than casement windows as the window opens to the inside and can be cleaned on both sides.
Another benefit of tilt and turn windows is that they are 4 – 8 times stronger than casement windows. This makes them ideal for doors and windows that are larger. The frames also have a steel core which increases the strength and durability.
The tilt and turn mechanism is also more secure than casement windows, since the handle can be locked at any angle. This is particularly important in areas with children because it stops them from accidentally opening the window.
Tilt and turn windows are a favorite option for a lot of houses, since they can be used in a variety of ways. They can be opened horizontally like a regular window, dropped down in the hopper style to provide ventilation, or tilted backwards to clean and maintain. This is a great option for those who wish to improve airflow in their home and can also aid in noise reduction. The glass is easily removable making them easy to clean and maintain. They are available in a wide range of sizes and colours. These windows are ideal for any home, and complement both traditional and modern styles.
Crank Handles
Crank handles require little effort to open, and provide a stunning view of the outdoors without obstructing the glass. They’re commonly employed in casement windows, that hinge on the side or awning windows. They feature an mechanism that is similar to windows, with a linkage arm that supports the window sash which can be opened or closed by cranking the handle in the clockwise direction. The mechanism of the crank window, handles unlike other handles, is usually subjected to a lot of wear and tear. This could cause the handle and gears to break or fall off the operator shaft. Regularly inspecting the crank handle and the operator mechanism will ensure that they are in good shape for many years.
A crank handle is an arm made of metal that is attached to a perpendicular rotating shaft. The arm is rotated in a circular direction by gripping and rotating it, much like you operate a sharpener. In some applications the handle can be operated by a leg.
The base of the crank handle is hollow. It’s this hollow that allows it to be connected to machinery and equipment. The handle’s arm also comes with a connecting rod which transforms the circular motion of the handle into rotary or reciprocating motion, which is used to operate machines and equipment.
In addition to adjusting machinery and equipment The crank handles are also commonly employed on boats to assist them be loaded onto trailers. They’re commonly made from stainless steel, which is resistant to corrosion in marine environments. Because of this, most boat crank handles are powder coated to protect them from damage and also to make them easier to clean.
Replace the crank handle if it stops working or does not allow you to open the window. Before doing so check for trim mounting screws inside the frame’s screen track. If there aren’t any, try to loosen the cover using a strong putty knife by sliding it between the window jamb as well as the frame and pulling on it. If it doesn’t work, you can take off the cover and get access to the crank mechanism by removing the screws in the window frame.