UPVC Window Handle Replacement
Replacing a damaged window handle is a easy process, and with the right tools it can be accomplished quite quickly. However, it is essential to know your handle’s type and spindle’s length prior buying an alternative.
Older uPVC window handles have a spur which protrudes and locks on the wedge striker. These can be either right or left-handed and have to be replaced with the same handle.
What type of lock and handle do I need?
There are a variety of window handles made of upvc and door locks, each with its particular advantages and uses. The type of handle you own will determine whether or not your locking mechanism is efficient and if it is easy to open the windows. Over time and door through regular usage, door the window handles made of upvc can become damaged or worn out, rendering them less secure and efficient. In some cases they could even be completely removed. If you notice that your upvc window handles have fallen off, it’s essential to fix them as soon as you can. This will stop possible burglaries and will keep your home safe.
It is a good thing that replacing your window handles made of plastic is a relatively simple task that can be completed by almost anyone. You’ll require a few basic tools, but with the appropriate knowledge, it’s a straightforward process that should take only a couple of minutes. To get started you’ll need to determine the type of handle and lock you have on your window made of upvc, which will help you to find the ideal replacement.
Inline Espagnolette Handles
These are the most common type of upvc handle and are usually placed on the outside of your window. They have a flat design and have an opening that is connected to the locking mechanism on the window frame when it is turned. Inline upvc handles also come with a spindle that runs through the center of the handle and into the frame of the double glazing window replacement to operate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles are attached to the frame of the window with a single screw and are less secure than other types of window handles.
Handles that turn and tilt
Unlike the other handles made of upvc the tilt and turn handles can both be rotated to open the window replacement, and the handle can be tilted to the side to let air flow in. In general, they have a 7mm spindle on the back of the handle. They are available in left and right-handed versions.
When purchasing replacement handles made of upvc It is crucial to measure the spindle’s length because not all handles are the same size. Drop something into the middle of the hole to measure the length. This is the largest spindle size that will fit in your windows.
What is spindles?
uPVC window handles function in a similar way as doors. By turning the handle, you can open a latch in the frame. This opens the window to allow it to be closed and opened. The handles can become damaged, especially if they’re frequently used or exposed to harsh environments. You may have to replace the handles on your uPVC window if they are not able to operate it properly.
There are many different types of uPVC handles, including Espag, Cockspur, and Spaded handles. They are designed to fit in the uPVC frames in a variety of ways, and each type of handle has a particular spindle that is used to lock the mechanism into the window. This is why it is essential to identify the kind of handle you have on your uPVC window so you can find the right replacement.
The base section of the handle will tell you what type of uPVC it is. A snap-in covers should be over the screw that holds the handle’s base in position. Remove this and then you should be able to see the second screw at the opposite end of the base of the handle. After both screws have been removed, you should be able to pull the handle away from the uPVC window.
After removing the uPVC handle, carefully remove it from the locking mechanism. Note the length of the spindle. You’ll need buy a replacement of the same length as the original handle and the locking device.
The spindle wears down and becomes inoperable with the locking mechanism. This can be due to damage caused by constant use or loosening of the locking mechanism, or even corrosion over time. If this happens, it is necessary to replace the window handle and locking mechanism to restore full functionality to your uPVC windows.
How do I remove my old handle?
In the course of time and daily use, window handles can be damaged or destroyed, and if this happens, it is crucial to repair them as soon as you can to ensure the safety of your home. It is easy to replace a worn or damaged handle. The job can be accomplished in less than one minute without the need for any special tools.
To remove the handle, you first need to remove the screw that is located at the bottom of the handle. After the screw is removed, the handle will be pulled away. A second screw is situated at the base of the handle. This too can be removed. Once both of these screws are removed the handle can be completely detached from the base portion of the window.
After removing the old handle and fixing holes, align the holes of the new handle to the existing holes in the window frame. If there is a sticker or cap on the new handle, take it off it if required and screw the handle in place. Once the handle is in place it is essential to check whether it functions by turning the handle and making sure that the lock mechanism activates.
Espag handles come with a spindle that protrudes from the handle and slots into a multipoint locking mechanism in the window frame. Cadenza windows have a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hook over the outer frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, you can insert the spindle inside the lock inside the window and then tighten it down. Once the handle is securely fixed in place, replace the’snap in’ cover and screw cap (if necessary). The handle is now ready to use, so try opening and closing the window several times to make sure that it functions properly and securely.
How do I install the new handle?
Switching your uPVC window handle isn’t difficult and the process is simple. All you need is a screwdriver and little bit of patience. The first thing you need to do is ensure that the handle is locked and then remove any screws that are visible. you can replace them with screw caps if required. Once the handle is removed and you are ready to take a note of the length of the spindle that extends from the back of the handle. This is important as it will determine what kind of handle to buy.
Espagnolette handles made of uPVC are the most popular kind of handle. The spindle passes through the handle to operate the locking mechanism within the window frame. When the handle is turned, it releases the latch on the window, allowing it to open. In regular use and over time, espagnolette handles may be damaged.
Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding knife that operates a multiple-point locking mechanism within the window. They are more secure than the espagnolette handle as they can only open from the inside. You can replace them using the same procedure as you would do for handles made of espagnolette however, ensure that the new handle is angled and not flat.
After you have chosen the correct handle, simply align the new handle with the existing screw holes prior to screwing it in place. Then, you should put the screws on and test the new handle. You can accomplish this by dragging the handle between the locked position to the unlocked a few time. If you encounter any issues, it could be worthwhile contacting a professional to determine if they can assist you in solving the issue. They can often advise you on the best way to resolve the issue in a quick and effective manner.