Replacement Upvc Window Handles
Most replacement upvc window handles come with everything you need but if the original handle had screws or pins that were holding it, they must be removed. Then, remove the’snap-in’ cover on the handle’s base.
The next step is to identify what type of window lock and handle you’re replacing. This is important!
Espag
Espag handles are a multipoint lock that is used to secure casement windows such as uPVC and wooden double glazing. The handle has a 7mm square shaft that fits inside an internal gearbox that is mounted on the uPVC window. When the handle is turned it will activate a series of locks around the window’s perimeter. Espag handles are also known as shootbolt handles. They provide more security than the conventional single point lock that is found on older frames.
They are available in a variety of different styles, such as inline and cranked handles that can be used in left or right-hand operation. There is also various sleek ergonomically designed handles that are designed to improve both the feeling of the handle as well as how it looks on your windows.
You will need to measure the size of the spindle from the base of your uPVC handle if you want to purchase the correct replacement window glass near me. This measurement, referred to as the step height, will help you select the ideal uPVC window handle for your home.
If you need to remove any screws that hold the handle, use the screwdriver or pliers. Once you have done this, you will need to take the handle apart by taking off the screws or pins that secure the spindle, and then taking it away from the window.
Once you have the handle removed, you’ll be in a position to access the locking mechanism within the frame of the window and remove the wedge block cockspur that is attached to the handle, allowing the window to open. The new uPVC window handles you have ordered should now be able to fit onto the cockspur wedge block, and then into the handle spindle and allow the window to open once again. It is recommended to replace the wedge block cockspur with a new one when changing your uPVC handle to ensure that it is properly secured.
Cockspur
Cockspur handles are typically found on older uPVC and aluminium windows. The handle closes and turns into a wedge-shaped receiver catch. (Not to be confused with timber latches, which are also covered in this section.) The handles are available in lockable and nonlockable versions. They are available in a variety of nose sizes that can be adapted to the existing frame.
The handle locks by a slender spur (little triangle bit) pulling up against a plastic wedge that is fixed to the frame. These are generally one way handles however the deadlock cylinder with a locking mechanism can be fitted for additional security.
Similar to Espag handles, the replacement handles for cockspur handle are simple to install All you require is a new set of screws (supplied) and the correct backset. The backset is measured from the baseplate to the underside of the nose of the handle. Aluminium window frames are usually 9mm wide, while UPVC is 21mm wide. There are also many different styles, Replacement upvc window Handles so it’s crucial to measure before buying the handle.
This kind of window handle can be substituted by simply unscrewing the existing handle and removing the spindle, or in certain cases the whole handle assembly. The new handle is screwed in place with a pair of pozidrivs screws. The pozidriv screws are available in either a brass or zinc finish to match the existing hardware. There is also the option of a locking version that self-locks.
This cockspur handle can be simple to install and is ideal to replace or repair old uPVC Windows. They feature an universal design, making them suitable for all profiles and backsets. Each handle has three packers, each having a different thickness. They are installed on the underside of handle noses and can be combined to achieve backsets as small as 9-13mm or as high as 21mm. They are available in right and left handed versions, and are available in either nonlockable or lockable models, with a variety of nose heights.
Tilt and turn
The premium European window style with tilt and turn has been around in Europe for decades, but it’s only just beginning to catch on in the United States. They combine the advantages of three window styles into one – tilt, pivot, and in-swing. They are perfect for older homes since they are more breathable than standard windows.
When in the closed position tilt and turn windows lock as a normal fixed window. But, by turning the handle 90@ or 180@ (depending on the type of tilt and turn window) the sash can be opened inward and the window will be tilted into allowing air to circulate through the gap at the top of the frame. This is a great way to ventilate without having to open the large potentially dangerous window.
If the handle is turned 90@ or 180@, the sash can be fully opened like the door. This allows for full air exchange, which is particularly beneficial in rooms with a lot of draft or houses where odors from smoke or other sources are likely to accumulate. It also makes cleaning the exterior of the glass much simpler as it can be done from inside the house which usually requires precarious ladders.
Tilt and turn windows are very secure. When locked in a closed position, they are difficult to open from outside, and they feature double seals to prevent rainwater from entering the home when they are in the tilted or in-swing position. This feature is particularly useful for older homes, where burglars tend to target windows which can be opened by the side hinges.
Spade
There are several different types of handles that can be put in on double-glazed windows made of upvc. There are two main types of handles: Cockspur and Espag. Other choices include tilt and turn handles, spade or blade handles as well as monkey tail handles and other kinds. The type of handle you select will depend on your preferences and the type of windows you have.
It is important to know how your current handle is connected to the frame in order to select the correct replacement upvc handle. This is referred to as handing and is a crucial piece of information to know when shopping online. Certain handle styles do not fit all windows. Some handles, for example, are angled while others are straight, and can be turned left or right. You’ll also require the spindle size which is the distance between the base of the handle and the head of handle.
Knowing whether or not your windows need a restrictor is also crucial when selecting the appropriate handle. These are typically employed in high-rise flats or commercial structures, but are not a requirement for homes used by the homeowner. It is also important to be aware of the step height which is the distance between the screw plate and the nose of handle.
Spade is a word that comes from Old English spadu or spaedu and has been translated into many languages including German spaten and Low German Spathen. In the 1920s, during the Harlem Renaissance in New York City spade began to be used as a sexist term for black people. Since the time spade has been a symbol of African American pride and heritage.
It is important to get the correct size when replacing a handle made of Cadenza. The handles are available in both straight and angled versions that differ by a few millimetres. The handle head is available in a variety of designs, including a T or D shape. It is also possible to be left with handles.