Replacement Upvc Window Handles
The majority of replacement window handles made of upvc include everything you require but if the original handle had screws or pins that held it in place, they are required to be removed. Then, you need to remove the snap-in cover that is on the base of the handle.
Next you will need to determine the type of window and lock that your new handle is for – this is crucial!
Espag
Espag handles are a type of multipoint locks that are designed to fit on casement windows like uPVC or wooden double glazing. The handle has a 7mm square shaft that is fitted into an internal gearbox that is mounted on the uPVC window. When the handle is turned it will activate a series of locks around the window’s perimeter. Espag handles are also known as shootbolt handles and offer additional security when compared to the conventional single point lock that is used on older window frames.
They are available in a number of different options such as inline and cranked handles that can be used for either left or right-hand operation. You can even find a variety of ergonomically designed handles that are made to enhance both the feeling of the handle and the way it appears on your windows.
You’ll need to measure the spindle size from the base of your uPVC handle if you wish to order the correct replacement. This measurement, known as the step height, will help you select the best uPVC window handle for your home.
If you require to remove screws that secure the handle, use pliers or a screwdriver. After removing the pins or screws that secure the spindle, you can disassemble the handle.
After removing the handle, you can access the locking mechanism in the frame of the windows and take out the cockspur block that is attached adjacent to the handle. This will allow the window to be opened. The new uPVC handles you have ordered should be able to slide onto the cockspur block and then into the handle spindle, allowing the window to open again. If you want to be sure that your uPVC handles are securely secured you should replace the cockspur block a brand new one.
Cockspur
Cockspur handles are found on older uPVC or aluminum windows. The handle rotates and closes onto a plastic wedge shaped receiver catch (not to be confused with timber window latches that are also covered in this section). The handles are available in lockable and nonlockable versions. They are available in different nose heights that can be adjusted to the existing frame.
The handle is locked by a small triangle-shaped spur (spur) which is fixed to the frame. They are typically one-way handles, but a locking deadlock is a possibility to add additional security.
The replacement handles for cockspurs are easy to install. All you need is the correct backset and a new set (supplied). The backset is the distance between the baseplate of the window to the underside of the nose of the handle. Aluminium window frames are generally 9mm wide, whereas UPVC is 21mm wide. There are many other variations however it is essential to measure the handle prior to buying the handle (see video below for how).
This kind of window handle can be replaced by simply removing the existing handle and taking off the spindle, or in some instances, the entire handle assembly. The new handle is fixed using a pair pozidrivs screws. The pozidriv screws come in either zinc or brass finishes to match the hardware, and there is the option of a locking version that self-locks.
This cockspur handle is simple to install and is ideal to replace or repair old uPVC Windows. They have a universal design that makes them suitable for all profiles and backsets. Each handle comes with three packers, each with a different thickness. They are installed on the underside of the handle noses and can be combined to create backsets as small as 9-13mm or as big as 21mm. They are available in right and left handed versions, and are available with lockable or nonlockable models with a choice of nose heights.
Tilt and turn
Tilt and turn windows are a popular European window style that has been in use for decades in Europe however, it is only getting noticed stateside. The windows combine the functionality of three different window styles: tilt, in-swing, and pivot. They are ideal for older homes as they provide more ventilation than standard windows.
When closed tilt and turn windows lock like a normal fixed window. By turning the handle either 90° or 180°, depending on the type of tilt-and turn window screen replacement the sash will slide inwards and the window tilts inwards to allow air circulation. This is a great way to allow air circulation without having to open the large potentially dangerous window.
If the handle is turned a further 90or 180 degrees the sash will be fully opened like doors. This allows for full air circulation, which is particularly beneficial in rooms with a lot of draft or houses where odors from smoke or other sources are likely to accumulate. It also makes cleaning the exterior of the glass much easier because it can be done from inside the home – a task that often requires precarious ladders.
Tilt and turn windows are also very secure. They are extremely difficult to open if locked in closed position. They also have double seals which keep rainwater out of your home while in the tilted position, or in swing. This can be a particularly helpful feature for older homes, where intruders are more likely to target windows that are opened via the side hinges.
Spade
There are several types of window handles that can be fitted to upvc double glazed windows. The two most popular kinds are Espag handles and doors Cockspur handles, then there’s also tilt and turn handles blade or spade handles, and monkey tail handles. The type of handle you choose will depend on the style you prefer and the type of window you have.
To select the right replacement upvc window handle, you need to know how your current handle is fixed to the frame. This is known as handing and is a vital aspect to consider when buying online. Certain handle styles don’t fit all windows. For example, some cockspur handles are angled, whilst others are straight and turn left or right. You should also know what the spindle’s length is, which is the distance from the base of the handle to the head of the handle.
Knowing whether or not your windows require a restrictor is also crucial when selecting the appropriate handle. These are usually used in high-rise apartments or commercial properties, but they aren’t a requirement for most domestic homes. You should also be aware of the step height which is the distance between the screw plate and the nose of handle.
Spade comes from Old English spadu, spaedu or spada. It has been translated into a variety of languages including German spaten and Low German spathen. In the 1920s, during the Harlem Renaissance in New York City spade started to be used as a derogatory term for black people. The word has since risen to prominence in pop culture and is now a well-known symbol of African American heritage and pride.
It is essential to choose the right size when replacing a handle made of Cadenza. Handles are available in straight and angled versions that differ by a few millimeters. The handle head is available in a variety of designs that include a D or T shape. It is also possible to be left without handles.