If you own a Stamped Zipper, O4691 Commander or other similar item that you plan on using for years, then you need to know how to use it with an O4691 Nail Stamping Plate. If you don’t know where to buy one from, then this article will be very helpful to you. This article will show you how to use the plate in order to stamp auto plate parts like windows and door jambs with your own two hands! You will also learn how to install the plate over a metal window and how to use it to stamp a window trim ring. This is all done simply and easily.
Before getting started, you will need to have the proper tools handy. Of course, the Stamped Zipper itself comes with all of these items. First, you will need an electronic plate mount that is compatible with your Stamped Zipper. These mounts are easily found online. Next, you will need some plastic or rubber stamps. In the event you loved this post and you would want to receive more details with regards to cross creek tractor assure visit our web site. (I would recommend the “large” size as these are the most durable.)
Next, you will need a piece of thick paper to make a template of your new plate. Cut your template to the exact size of your window trim. It does not matter what size window you will be stamping onto. The next step is to lay your piece of thick paper flat on your work table or office desk. You will now need to remove the adhesive from the back of the plate.
You will now need to attach the rollers to your plate. Do this by pressing the rollers into the template you made earlier. After this is complete, use your sharpest razor and shave the sides of the plate where you will be stamping onto. This will ensure that your rollers stay secured.
Once the rollers are completely secure, place the window trim into place and then use a small amount of glue to attach it to the back of the rollers. Once this is done, put the plate onto the door using your screws. Make sure that your screws are drilled directly into the wood instead of using a drill bit. Use a very small amount of glue to seal the two pieces together. Using heat when you attach the trim allows for a stronger hold and makes the glue bond stronger.
Now that your trim has been attached, you will be able to start stamping using the plastic rollers. If you have any questions, you can always visit a Stamped Zipper forum like the one located here. You will find other people who are willing to help out with any Stamped Zipper questions that you may have. Before you know it, you will have a gorgeous new cabinet that you did not have before. Good luck and happy stamping!