UPVC Window Handle Replacement

It’s simple to replace a broken window handle using the appropriate tools. However, it is essential to know your type of handle and its spindle’s length prior to purchasing the replacement.

Older uPVC window handles have a spur which protrudes and locks over a wedge striker for cockspur. These can be left- or right-handed and must be compatible when replaced.

What kind of lock or handle do I have

There are many different types of window handles made of upvc and locks, each having their particular advantages and uses. The type of handle you have will determine how easy it is to open your windows and whether or not the locking mechanism works according to the plan. Over time, and with regular use, the upvc handles on your windows may be damaged and worn out. This makes them less secure and effective. In some instances, they could even fall completely off. It is important to repair your window handles made of upvc immediately if you begin to notice they are falling off. This will help prevent burglaries, and keep your house secure.

The good news is that replacing your upvc window handles is a relatively simple task that is achievable by nearly anyone. With a few basic tools and the right information it’s a straightforward procedure that should take no less than a few minutes. You must know the type of lock or handle you have on your window. This will allow you to choose the appropriate replacement.

Inline Espagnolette Handles

These are the most common type of upvc handle and are usually located on the outside of your window. They are flat in design and feature a latch that engages with the locking mechanism on the frame of the window when it is turned. Inline upvc handles also have a spindle that goes through the center of the handle and then into the frame of the window to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles are fitted with a single screw that secures the handle to the window frame and aren’t as secure as other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other handles made of upvc in that they can be turned to open the window and then tilted to the window to let air circulate. In general, they feature a 7mm spindle on the side of the handle. They are available in both left and right-handed versions.

When buying replacement upvc handles, it is important to check the spindle length since not all of them are the same size. Drop something into the middle of the hole to measure the length. This is the largest spindle size that will fit in your windows.

What is the spindle?

uPVC window handles function in a similar way like doors, turning the handle to activate an opening inside the frame. The window is then opened and shut. However, sometimes handles can be damaged, especially if they are regularly used or exposed to extreme weather conditions. This can leave you needing to replace window glass near me your uPVC handles on windows since they may not be able to operate the window in a proper manner anymore.

There are several different types of uPVC handles that are available, including Espag, Cockspur and Spaded handles. They are designed to fit inside the uPVC frames in various ways and each handle type has a particular spindle that is used to lock the mechanism fitted into the window. This is why it is crucial to identify the kind of handle you have on your uPVC window so you can find the right replacement.

You can find out what kind of uPVC handle you are using by taking a look at the base of the handle. A snap-in covers should be over the screw that holds the base of the handle in place. When you remove this cover, you will be able observe the second screw that holds the handle base in position. Once both screws are removed you should be able to pull the handle away from the uPVC window.

Once you have removed your uPVC window handle, you will need to remove the spindle that was previously attached to the locking mechanism. Make note of the length of the spindle as you’ll need to make sure that you buy an alternative that is the same length as your original handle and locking mechanism.

The primary issue with window handle problems with uPVC is that the handle spindle gets worn out and cannot longer operate the locking mechanism. This can be due to damage caused by constant use or loosening of the locking mechanism, or even corrosion over time. If this happens, it is necessary to replace the window handle and the locking mechanism to restore full functionality to your uPVC windows.

How do I remove the handle from the previous one?

Over time and through everyday use, window handles can become damaged or broken, and if this happens it is important to repair them as soon as you can to ensure the safety of your home. The good news is that replacing a worn or UPVC Window Handle Replacement damaged handle is a fairly simple task that can be carried out in less than an hour and doesn’t require any specialist tools.

To take off the handle, first remove the screw that is located at the bottom of the handle. Once the screw has been removed, the handle can be removed. There is another screw located at the bottom of the handle’s base, and this can be removed too. After these two screws are removed, the handle can be detached from the window’s base.

Once the old handle has been removed, take the new handle and align the fixing holes with the holes currently in the window frame. If there is a cap or sticker on the new handle remove it if necessary and then put the handle back in place. It is crucial to verify that the handle works once it is put in place. Turn the handle around and make sure that the lock mechanism is in place.

Espag handles have spindles that extend from the handle and slot into the multipoint locking mechanism of the window frame. Cadenza windows come with an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over either the outer frame or transom bar cross member in the window.

Once you have the new handle in place, insert the spindle inside the lock inside the window and then tighten it. Once the handle is securely fixed in place then replace the snap-in cover and the screw cap (if necessary). The handle is now ready to use to use, so try opening and closing the window several times to check that it is working well and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn’t difficult, and the process is simple. All you need is a screwdriver and a bit of perseverance. The first thing you need to do is make sure that the old handle is in the unlocked position and then remove any screws that are visible, you can replace them with screw caps if required. After removing the handle, you will need to note the length of spindle that extends from the back. This is crucial as it will determine the kind of handle that you will need to purchase.

Espagnolette handles are the most commonly used type of handle used on uPVC windows. The spindle runs through the handle to operate the locking mechanism in the window frame. The handle opens the latch and allows the window to open. When used regularly and time, espagnolette handles may become damaged.

Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding blade that operates a multipoint locking mechanism within the window. They are more secure than the espagnolette handles since they only open from the inside. They can be replaced by the same procedure as espagnolette handles but you should make sure that the new handle has a curved blade as opposed to a flat one.

Once you have decided on the right handle for you then you can place the new handle with the screw holes and then screw it into place. After that, you should put the screws back on and test that the new handle functions properly. This is done by moving the handle from locked to the unlocked position and the reverse direction several times. If you experience any issues, it may be worth contacting a specialist to see if they are able to assist in resolving the issue. They can advise you on how to resolve the problem in a timely and UPVC Window Handle Replacement effective manner.

Leave a Reply

Your email address will not be published. Required fields are marked *