Repairs to uPVC Windows
uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not get rotten or rusty like timber and aluminum.
It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you’re doing all you can to keep your windows in good condition.
For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However when you have double glazed window repairs near me-pane windows that are secured by internal beading, it will be more difficult to take out the existing panes and install new ones. In this situation it is essential to purchase plastic spacers in order to help the new pane fit into the window repair frame.
Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you start working on the glass so that any shards fall onto the fabric instead of landing on the floor where they can be trodden under and cause further damage.
Once the glass is removed, it’s a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap is large, you might want to consider using a security door that has an integrated window, since it will provide the best of both worlds.
2. Sagging
upvc window repair is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC window could cause issues with light, draughts and even security. It is crucial to act when you realize that your upvc window repair near me windows are falling down.
To fix a window that is sagging you can try repositioning the hinges. First, you’ll need to unblock the windows to access the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you have repositioned your hinges. If you’re satisfied with the fit of the window, you can tighten screws to hold them in the right position.
If you cannot reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it’s crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.
UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism wearing out. Luckily, it’s not difficult to fix the handle of a window that is loose yourself. The first step is to close your window and do an initial test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it isn’t then you can use a screwdriver to loosen the handle, and then return the mechanism to its original position.
3. Water Leaks
If you’re waking up to wet floors and mouldy walls each time it rains it’s crucial to take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.
It is a fairly easy fix that can be completed by any DIY expert. Depending on how serious the problem is, the old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to ‘over-caulk’ as this will only make the area more difficult to clean and could reduce your energy efficiency.
Make sure that the drainage holes have no debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.
Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.
It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and blow open with a breeze it could be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.
Like any mechanical part hinges will wear out over time. It’s easy to change the hinges on a window but it’s much easier if someone else helps you to hold the frame.
Make sure that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.
The issue could be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to provide suggestions.
Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different things. The hinges can also become unbalanced due to wear, creating an opening where the sash meets frame. If they are beyond repair, it may be required to realign them. Second, the interlock can also become unbalanced. This happens on the hinge’s side, and might require to be cleaned. In some cases it might be necessary to replace them.
These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc Window repair with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the risk of draughts.
The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can help stop cold air from entering and keep your home warm and cozy!
With a little regular maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. It is crucial to keep in mind that all windows eventually get worn out and it may be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your window made of upvc, it’s best to consult an expert as soon as possible.